stm32f2/include/periph_cpu.h

CPU specific definitions for internal peripheral handling.

CPUID_ADDR

Starting address of the CPU ID.

(0x1fff7a10)

ADC_DEVS

Available number of ADC devices.

(2U)

HAVE_ADC_RES_T

Override the ADC resolution configuration.

enum @84

PORT_A = 0

port A

PORT_B = 1

port B

PORT_C = 2

port C

PORT_D = 3

port D

PORT_E = 4

port E

PORT_F = 5

port F

PORT_G = 6

port G

PORT_H = 7

port H

PORT_I = 8

port I

enum adc_res_t

ADC_RES_7BIT =             (0 << 4)

ADC resolution: 7 bit.

ADC_RES_9BIT =             (1 << 4)

ADC resolution: 9 bit.

ADC_RES_11BIT

ADC resolution: 11 bit.

ADC_RES_6BIT =             (0xa00)

not supported by hardware

ADC_RES_8BIT =             (0xb00)

not supported by hardware

ADC_RES_10BIT =             (2 << 4)

ADC resolution: 10 bit.

ADC_RES_12BIT =             (3 << 4)

ADC resolution: 12 bit.

ADC_RES_14BIT =             (0xc00)

not supported by hardware

ADC_RES_16BIT =             (0xd00)

not supported by hardware

struct adc_conf_t

ADC device configuration.

Available number of ADC devices.

ADC channel configuration data.

ADC line configuration values.

CPU specific ADC configuration.

ADC channel configuration data

CMU_Clock_TypeDef cmu

the device CMU channel

ADC_Type * dev

ADC module.

gpio.h::gpio_t pin

pin to use

pin connected to the channel

Use GPIO_UNDEF non-muxed ADC pins, e.g. ADC0_DP, or for internal channels, e.g. Bandgap

uint8_t chan

ADC channel.

CPU ADC channel connected to the pin.

internal channel the pin is connected to

Written as-is to ADCx_SC1x before conversion. This also decides single-ended or differential sampling, see CPU reference manual for ADCx_SC1x

uint8_t avg

Hardware averaging configuration.

Written as-is to ADCx_SC3 before conversion, use kinetis/include/periph_cpu.h::ADC_AVG_NONE and kinetis/include/periph_cpu.h::ADC_AVG_MAX as a shorthand notation in the board configuration

ADC_TypeDef * dev

ADC device used.

ADCx - 1 device used for the channel.